IP DVR SERVER
USER MANUAL
5
2.1.2.
Temporarily Changing IP DVR SERVER’s IP Address, Using NetSetup Utility.
When executed, NetSetup Utility in shows the IP DVR SERVER’s MAC address in the same
network. Even if it’s not indicated, you can manually input the MAC address and use it.
You must meet the following system requirements for executing NetSetup.
z
Compatible O/S : Microsoft Windows 2000 / XP / 2004 Server / Vista
Please make sure to have computer used and the IP DVR SERVER in the same subnet (network
group).
(
１
)
Connect the computer and IP DVR SERVER in the same network.
(
２
)
Please check the computer’s network setup and choose an IP address for IP DVR SERVER
(make sure to have computer used and the IP DVR SERVER in the same network group).
(
３
)
After confirming from its appearance that it is functioning after power is on (check to see if
status LED is on or not), run the NetSetup in the computer.
(
４
)
Check the MAC address of IP DVR SERVER, choose the one you’d like to change and input the
desired new IP address and click on ‘Set IP Address’ to request for a change. If MAC address of IP
DVR SERVER you wish to change does not show up on the list, you can manually input the MAC
address and IP address and do the same.
(
５
)
If a window pop up, stating process was carried out successfully, try to connect to the IP
address from web browser.
(
６
)
If you are not getting an answer from the web browser, click on `PRESET’ to return to factory
default setting and start from the beginning again.
