Lintelek ID130, User Manual

Page: 8 / 16

3. Bind the Device
Tap to select ID130HR/ID130
in the list of found devices
Charging: remove the host from the wrist band by gently pulling
the band out of the host; connect the device host to a normal DC
USB port (5V-500mA).
Make sure your smart phone's Bluetooth is ON before attempting
to bind your fitness tracker.
1) Open "VeryFitPro" APP and on the bottom toolbar, go to
"Device" tab.
2) Tap " Bind Device " at the bottom of "Device" page and your
smart phone starts searching devices. In the list of found
devices, tap ID130/ID130HR and confirm to connect the device
to your smart phone.
2) If you unbind the device under
Bluetooth connected state, the
APP will set the settings back to
default and all the data on device
will be cleared. If you unbind the
device under Bluetooth
disconnected state, the APP will
set the settings back to default,
but the data on device will not be
cleared.
3) The device can only link to one
Bluetooth device at a time. During
connecting please confirm there is
no other Bluetooth devices
nearby.
ID130HR
ID130
7
Notes:
1) The fitness trackers screen needs to be awake (tap the touch key to
light the screen) to bind with your smart phone. If bind failed, wake up
your tracker and restart device search.
USB
Charging Plug
Display Screen
(Non-touch)
Touch Key