Battery:
Battery Installation:
Push down the battery cover from the back case to slide open the battery compartment.
Insert the LI-PO battery into the battery slot as indicated. (The upper the metallic plate from the battery must be
connected with the metal points from the slot)
After the installment of the LI-PO battery is complete, push the battery compartment cover back into position.
Recharging The Battery:
Please charge the battery to full volume before using the LinQTab Mini DLP Projector for the first time.
The led light indicated will display in red when the projector is recharging; Once the charging is complete, the led
light becomes dark.
Note:
Please use the included power adapter only or the authorized adapter to recharge the LinQTab Mini DLP Projector.
Using any other power adapter may cause unrepairable damage to your device, void your warranty or it may cause
the battery to overheat which could result in the battery exploding.
