8
4.2
Waterproof
Cover
&
Ethernet
Cable
Installation
If
you
need
to
use
IOT-CPE5G
outdoors,
the
waterproof
cover
and
cable
gland
should
be
installed
under
the
bottom
of
the
device.
A. Install
the
rubber
ring
into
the
bottom
of
the
device.
Note
that
the
round
part
needs
to
face
the
gap
of
bottom
when
installing,
otherwise
it
may
cause
waterlogged.
B. Connect a round Ethernet cable to LAN1/WAN port, then pass the Ethernet cable through all parts of
the cable gland and the bottom cover.
C. Fix the bottom cover to the bottom of the device with 4 screws.Note that the arrow behind the cover
needs to face the bracket mounting screws.
Note:
Bottom cover can be fixed with the device via the wiring behind the cover.
