5. OPERATION
5.1. GENERAL SAFETY PRECAUTIONS
WARNING!
This section describes basic safety rules for
using the machine. This information is never a substitute for
professional skills and experience. If you get into the
situation where you feel unsafe, stop and seek expert advice.
Contact your machine dealer, service agent or an
experienced machine user. Do not attempt any task that you
feel unsure of.
Before operating the machine, please read the
instructions carefully and make sure you understand
them.
Save the instructions and safety precautions for later use.
5.2. WORKPLACE SAFETY
The workplace should be kept clean and well lighted. In
dark and cluttered areas the risk for accidents is increased.
Do not operate the machine in areas at risk of fire or
explosions.
5.3. ELECTRICAL SAFETY
WARNING! When using electrical devices there is a risk
of electric shock. Avoid unfavorable weather conditions
and body contact with lightning conductors and metal
objects. Follow the instructions for use in order to avoid
injuries.
- Do not connect the machine to the electrical supply if
the socket or cable is damaged.
- Check that the mains voltage corresponds to the voltage
on the rating plate of the machine.
- Inspection and maintenance must be performed when
the engine is powered down and the plug is removed from
the socket.
- Always turn the machine off before unplugging it from
the electrical outlet.
- Do not move the machine while disconnecting it.
Disconnect the plug by pulling the plug, not the cable.
- Do not operate the machine with a damaged power cord
or plug. If the power cord or the plug is damaged, contact
your service representative to change a new one.
- Do not operate the machine where water can reach
the equipment. It can damage the equipment or injure
the operator.
-9-
