![background image](http://html1.mh-extra.com/html/linn/unidisk-sc-player/unidisk-sc-player_owners-manual_1925518015.webp)
General Setup
OSD Language
(on-screen display language)
Default setting:
English
Choose the language you want on-screen information
and menus displayed in.
Aspect Ratio
Default setting:
16:9
Choose the option that matches your display device;
either
4:3
,
Letterbox
or
16:9
.
Video Standard
If you have already selected the video signal standard
for your TV using the
DISP
(display) key on the handset
(see
Video Output
section at the start of this chapter),
skip this item.
Default setting:
Native
Choose the option that matches the video signal
standard accepted by your display device. Set to
Native
if your display device accepts both NTSC and PAL standards.
Notes:
If Video Standard is set to
Native
you may notice the screen flicker when a DVD-Video
begins to play. This happens when the UNIDISK SC switches from one video signal
standard to the other.
If your display device only accepts one type of standard and a PAL to NTSC, or NTSC to
PAL conversion is applied, you may notice degradation in the picture quality when
viewing DVD-Videos or DVD-Audios that have been recorded in the other standard.
NTSC Type
For countries that use the NTSC signal standard.
Default setting:
North American
If in the U.S.A. or Canada, set to
North American
.
If not in the U.S.A. or Canada, set to
World
.
Prim. (Primary) Display Device
Default setting:
Interlaced
The UNIDISK SC is able to account for the video delay
inherent in the processing required for progressive video
signals, thus ensuring that both video and audio signals
are output simultaneously. Set this option to suit the
main display device in your AV system.
Interlaced Out
(this item is not availalble
on the Phono version)
Default setting:
RGB
Select the video output signal accepted by your display
device. If your display device accepts both RGB and
YPrPb signals, set to YPrPb as it usually provides better
picture quality.
Colour Level
(applies to the YPrPb outputs on
the Phono version, only)
Default setting:
Standard
The Colour Level option adjusts the amount of colour
information sent to your display device.
If you want the UNIDISK SC to determine the setting
based on the video format of the disc being played, set
to
Auto
.
If your display device accepts a 1 V peak-to-peak input, set to
High
.
If your display device accepts a 0.7 V peak-to-peak input, set to
Standard.
Setup Menus
English
UNIDISK SC PLAYER
Owner’s Manual
9
Summary of Contents for UNIDISK SC PLAYER
Page 1: ...English Espa ol Nederlands Owner s Manual UNIDISK SC PLAYER...
Page 2: ......
Page 40: ......