RS232 Knekt Interface
32
[rAINP=p]
Selects an audio input without affecting the current video input, and automatically reads back status.
After selecting an input, the [rAINP=?] command should be used to ensure that the input was
successfully selected.
Command
Response
Description
[rAINP=NONE]
!r<CR>
Disconnects the current audio input
[rAINP=AAIvalue]
!r<CR>
Select Analogue Audio Input 1-10
[rAINP=DAIvalue]
!r<CR>
Select Digital Audio Input 1-5
[rAINP=?]
!rAINP=name<CR>
Returns the selected audio input
[rVINP=p]
Selects a video input without affecting the current audio input, and automatically reads back status.
After selecting an input, the [rVINP=?] command should be used to ensure that the input was
successfully selected. When called as a “source” device, the S-VHS inputs are not available.
Command
Response
Description
[rVINP=NONE]
!r<CR>
Disconnects the current video input
[rVINP=VHSvalue]
!r<CR>
Select S-VHS input 1-2
[rVINP=CVIvalue]
!r<CR>
Select CVBS input 1-8
[rVINP=?]
!rVINP=name<CR>
Returns the selected video input
[rDINP=p]
Selects a direct audio or video input, and automatically reads back status. After selecting an input,
the [rDINP=?] command should be used to ensure that the input was successfully selected. When an
audio input is selected, the current video input is disconnected. When a video input is selected, its
linked audio input is also selected. If there is no linked audio, the current audio input is
disconnected. When called as a “source” device, the S-VHS inputs are not available.
Command
Response
Description
[rDINP=NONE]
!r<CR>
Disconnects all audio and video inputs
[rDINP=AAIvalue]
!r<CR>
Select Analogue Audio Input 1-10
[rDINP=DAIvalue]
!r<CR>
Select Digital Audio Input 1-5
[rDINP=VHSvalue]
!r<CR>
Select S-VHS input 1-2
[rDINP=CVIvalue]
!r<CR>
Select CVBS input 1-8
[rDINP=?]
!rDINP=name<CR>
Returns the selected direct input