ENGLISH
Option
Display
Brightness
Display
Content
Display
Timeout
Sleep Display
Delay
Settings
Auto
Percentage
(2 – 100%)
Source and
Volume
Volume
Source
Last Used
1 – 10 seconds
Delay in
minutes and
seconds (0
seconds to 5
minutes)
Off
Description
If set to ‘Auto’, the display brightness will change with the surrounding lighting conditions (dimmer
surroundings => dimmer display / brighter surroundings => brighter display).
To select ‘Auto’, scroll up or down the percentage settings and the ‘Auto’ option will appear in place of 0%.
With ‘Percentage’, you can select a setting between 2% and 100%. The display brightness will (while out of
standby) remain set to the specified brightness setting.
If set to ‘Source and Volume’, both the currently selected source and the current volume setting will be
displayed.
If set to ‘Volume’, only the current volume setting will be displayed.
If set to ‘Source’, only the current source setting will be displayed.
If set to ‘Last Used’, the last setting (source or volume) to be adjusted will remain on the display.
Note:
The above settings are applicable only when the unit is out of standby, is not in display-sleep mode and is
not being adjusted.
Determines how long, after an adjustment is made, before the display reverts to its ‘Display Content’ setting
as detailed above.
The time setting determines how long after the last command has been received that the display goes to
sleep (where only 3 dots are visible on the display).
If set to ‘Off’, the display will not go to sleep.
Default
setting
Auto
Source and
Volume
1 second
Off
Display configuration
14
MAJIK KONTROL
ENGLISH
