![background image](http://html1.mh-extra.com/html/linn/majik-cd/majik-cd_owners-manual_1925514029.webp)
MAJIK CD
21
Option
SPDIF Output
Settings
Off
Raw
LtRt PCM
Description
If you are using your MAJIK CD player as a stand-alone device, set to ‘Off’ (there will be no output from
the DIGITAL OUT output).
If you are using an external DAC (digital to analogue converter) - set to ‘Raw’ (data from the DIGITAL OUT
output is identical to the source data).
If you are recording to an external digital source (e.g. DAT player) - set to ‘LtRt PCM’.
Default
setting
LtRt PCM
Audio Configuration
Option
Handset
Commands
Accepted
Accept DVD
Commands
Remote In to
Remote Out
IR to Remote
Out
Settings
Yes
No
Yes
No
Yes
No
Yes
No
Description
If set to ‘Yes’, the unit will respond to handset commands.
If set to ‘No’, the unit will not respond to handset commands.
Note – if this option is set to ‘No’, setup will not be accessible via the handset. It will then be necessary
to access setup via the front panel keys – see
To enter and navigate the Setup menus, above.
If set to ‘Yes’, DVD commands such as Play, Pause, Stop, Skip etc that are relevant to the MAJIK CD
player will be accepted from the handset whether the handset is in DVD or CD mode.
If set to ‘No’, these commands will only be accepted if the handset is in CD mode.
Note – see
Operation – Handset for further details of handset modes.
If set to ‘Yes’, remote commands received at the REMOTE IN socket will be passed through to the
REMOTE OUT socket, allowing remote commands to be relayed to other products downstream.
If set to ‘No’, remote commands will be accepted by the MAJIK CD player but will not be relayed to other
products downstream.
If set to ‘Yes’, remote commands received at the IR sensor on the front panel will be passed through to
the REMOTE OUT socket, allowing remote commands to be relayed to other products downstream.
If set to ‘No’, remote commands will be accepted by the MAJIK CD player but will not be relayed to other
products downstream.
Default
setting
Yes
Yes
Yes
No
Unit Configuration
ENGLISH