background image

Waste Electrical and Electronic Equipment Directive Directive 2002/96/EC 

of the European Parliament and of the Council 

The symbol (right) is shown on this product. It indicates that the product 

should not be disposed of with regular household waste, but should be 

disposed of separately.

Electrical and electronic equipment can contain materials that are hazardous 

to the environment and human health and therefore should be disposed of at a 

designated waste facility or returned to your retailer for the appropriate recycling to 

take place (see www.linn.co.uk for further information).

 If you wish to dispose of this product and the product still functions, please 

consider recycling/reusing it by donating it to a charity shop, selling it or part-

exchanging it with your retailer.

Waste Electrical and Electronic Equipment 

(WEEE) Directive

Copyright © 2007 Linn Products Ltd. First edition September 2007.

Linn Products Limited, Glasgow Road, Waterfoot, Eaglesham, Glasgow,  

G76 OEQ, Scotland, United Kingdom

All rights reserved. No part of this publication may be reproduced, stored in 

a retrieval system, or transmitted, in any form or by any means, electronic, 

mechanical, photocopying, recording, or otherwise, without the prior written 

permission of the publisher.

The content of this manual is furnished for information use only, is subject to 

change without notice, and should not be construed as a commitment by Linn 

Products Limited. Linn Products Limited assumes no responsibility or liability for 

any errors or inaccuracies that may appear in this manual.

Trade marks used in this publication: 

Linn

 and the 

Linn logo

 are registered  

trade marks of Linn Products Limited. 

Majik

Aktiv

 and 

Skeets

 are trade marks  

of Linn Products Limited.

The information in this manual is furnished for informational use only, is subject to 

change without notice, and should not be construed as a commitment by Linn 

Products Limited. Linn Products Limited assumes no responsibility or liability for 

any errors or inaccuracies that may appear in this manual.

UK Registered Design No: 4003656

Printed in the United Kingdom.

Pack 1320/1

Copyright and Acknowledgements

iv

Majik 140

Summary of Contents for Majik 140

























Reviews: