Linn Majik 140, Owner'S Manual

Page: 15 / 24

7
Majik 140
To modify the link strips for multi-wiring or multi-amping applications:
• Remove the link strips from the loudspeaker, as explained opposite.
• Break the links by using a strong pair of snips, a small hacksaw or snap them
at the break-points by carefully bending the strips back and forth with pliers.
• File down any sharp edges to prevent the possibility of injury.
Note:
If you will be using both sides of the separated link, ensure your break creates
a definite gap in order to eradicate the possibility of the links accidentally
re-connecting when fitted to the loudspeaker.
Important notes on using the link strips
• Never use the strips to link positive (+) and negative (-) terminals together.
• When multi-amping, ensure that the link strips do not short-circuit amplifier
channels together. Shorting the outputs of separate amplifier channels
together can damage the amplifier(s) and loudspeaker drive units.
• Do not connect more than one strip per terminal.