background image

4

INSTALLATION   Unpack the LK100 and retain the packing for future transportation.
Ensure that the amplifier is earthed and that adequate ventilation is provided. Position the amplifier at
least 15cm (6") from the turntable to avoid hum.

LK100 Power Amplifier

Owner Manual

Mains Lead                              

Spare Fuses

2 x Pairs Loudspeaker Plugs

VOLTAGE SELECTION   The LK100's transformer must be set to the voltage of the country of use – see
below:

WARNING - ENSURE MAINS SUPPLY IS DISCONNECTED

To set the voltage, rotate the voltage selector on the underside of the product until the appropriate
voltage is aligned with the white marker.

WARNING

 Use the earthed moulded mains lead supplied.  Never use an unearthed plug or adapter.

WARNING

THIS APPLIANCE MUST BE EARTHED

IMPORTANT

The wires in the mains lead are coloured in accordance with the following code:

 Green-and-yellow:

Earth

   Blue:

Neutral

 Brown:

Live

As the colours of the wires in the mains lead of this appliance may not correspond with the coloured
markings identifying the terminals in your plug, proceed as follows:

The wire that is coloured green-and-yellow must be connected to the terminal in the plug, which is
marked with the letter E, or the earth symbol, or coloured green or green-and-yellow.

The wire that is coloured blue must be connected to the terminal marked with the letter N or coloured
black.

The wire that is coloured brown must be connected to the terminal marked with the letter L or coloured
red.

CONTENTS

Summary of Contents for LK 100











Reviews: