Linn Komri Quick Start Manual Download Page 4

Page: 4 / 4

Step 11: Pick up the amplifier and rest it on the support

pins as shown in the photo.

Step 12: Bring the module to a position where it is vertical

and then push it into the cabinet keeping it vertical
as you do so.

Step 13: Re-fit the 10 screws

Step 14: Repeat this procedure with the other Komri.

Step 15: Fully test both Komri’s.

End of procedure

Summary of Contents for Komri

Page 1: ...tact Linn Service Please read through this procedure in its entirety before starting work It is important to follow ALL instructions carefully and exactly Estimated time for completion of this task 45...

Page 2: ...protective foam a towel blanket or similar soft material to protect the heatsink 53cm including foam pad Step 3 Remove the 10 screws securing the amplifier module to the cabinet Leave one of the top s...

Page 3: ...ening can Remove all 4 screws 1 at each corner and the lift the end of the screening can upwards in the direction shown Note the cables at the end that are cable tied may restrict the movement of the...

Page 4: ...in the photo Step 12 Bring the module to a position where it is vertical and then push it into the cabinet keeping it vertical as you do so Step 13 Re fit the 10 screws Step 14 Repeat this procedure...