Page 10 of 29
Copyright © 2010 Linn Products Ltd.
1.
Remove and retain the top 6 bolts (as
shown) that secure the module in position.
Do not remove the lower bolts!
2.
Remove the 2 bolts located at the bottom
of the module.
3.
Carefully lean the amp module back, until it
is being supported by the strap.
Disconnect all the cables between the amp
module and speaker (8 cables in total).
Note: Some of these cables are short.
Failure to remove all 8 may result in
damage to the cables and/or the
connectors.
REMOVING THE AMPLIFIER MODULE
