Linn Classik-K Product Description Manual Download Page 7

Classik-K Product Description 

The hardware control always goes low to enable a standby, with the exception of the 
power-fail line going to the control board, which goes high. 
The power-fail, temperature trip, software mute and headphone mute all common 
together to provide control over the standby and mute lines to the power amplifier. 
This means that should any of the hardware fault conditions occur, the power 
amplifier goes silently into standby without any software dependence. 
  

 

Multiroom (new feature) 

Two new Multiroom features have been added to the Classik-K – Connect and Knekt 
– these are fully explained later. A Linn Multiroom system’s main functions are to 
provide very high quality 

audio distribution

display information

 

and

 

control

 of 

products from remote locations. The Classik-K can distribute and control internal 
sources (CD & Tuner) as well as external sources. Display information is available for 
internal sources only. Music is distributed from a Main-room to up to four secondary 
rooms for Connect or up to 128 rooms for Knekt. 
 

Interconnection

 between rooms is made using CAT5 cable, terminated with RJ45 

plugs. Compared to most hifi cable, CAT5 is inexpensive and, in conjunction with 
Linn Driver & Receiver circuits, provides by far the best method of sending audio 
over long distances. Pre-terminated CAT5 cables can be bought from Linn in 25M, 
40M or 60M lengths. Trained Knekt installers will be able to make up CAT5 cables to 
their own requirements in the normal way (cable configuration as Knekt). 
 

What are the main advantages of the Classik-K Multiroom 
functionality? 

• 

As a lifestyle improvement, audio-distribution is hard to beat. It is superior in so 
many ways, compared to having separate systems throughout the house (or one 
system played loud !) – you can move from room to room, while listening to music 
– and have control in each room – you can skip, mute, adjust volume, change 
radio stations etc in any of the rooms. 

• 

Party-mode – the same music can be distributed throughout the house and 
controlled by the main-room Classik. Ideal for parties, but also useful for more 
relaxing situations where you wish to listen to music all through the house. 

• 

All Secondary-rooms have the option to listen to & control their own room Classik 

or

 the main-room Classik at the touch of a button – literally! 

• 

Any 2-channel analogue audio source can be distributed from the main room to 
other rooms – this could include DVD player, CD Multiplayer, Music server (e.g. 
Kivor) etc – in other words source products that most customers would only tend 
to have in their Lounge. 

• 

Allows other family members to access Main-room source products from their 
own rooms. 

• 

Non-Linn products in the main-room can be controlled from other rooms by firing 
that product’s remote control handset at the Classik-K in that room – commands 
will be relayed to the product via the interconnect cables and an IR repeater. 

• 

You can keep your CD collection in your living room instead of moving discs from 
room to room. 

• 

A single Classik-K can work as a Driver 

or

 a Receiver with no configuration 

required. 

• 

Very easy to set up and very easy to use. 

• 

Linn multiroom at a more affordable price.  

Page 7                                                    

     Copyright © 2001 Linn Products Limited. All rights reserved. 

Summary of Contents for Classik-K


















Reviews: