manualshive.com logo in svg

Linn Classik-K, Product Description Manual

Share
Download
Linn Classik-K Product Description Manual Download Page 15

Classik-K Product Description 

Classik in Knekt system, with Classik as Secondary-room 
receiver (Intersekt system)

 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

 

 
 
 
 
 
 
 
 
 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

BALANCED AUDIO  (ROOM) OUTPUTS 

Main-Room 

Intersekt  

INPUT 

ACC 

Secondary-room 

Classik (Receiver) 

Linn 

 

CD 

RCU 

The connection for room 1 could be repeated to include up to 128 secondary rooms, 
each of which could utilise a Classik or a variety of receiver types, (Line Receiver, 
Sneaky Receiver/Majik, Roomamp, Direktor etc.) 

Function notes 

♦ 

With this configuration, an RCU is required in the Secondary-room in all cases. 

♦ 

The Classik and its RCU must be programmed as Knekt products by a trained Knekt installer and 
the Classik would then effectively become a conventional Knekt Receiver. 

♦ 

As with all Intersekt systems, but unlike the non-Intersekt systems detailed above, any Secondary-
room can listen to any Main-room source – e.g. 8 different rooms could listen to 8 different Main-
room sources simultaneously. 

♦ 

RS232 control of Classik-K is not possible 

Page 15                                                    

    Copyright © 2001 Linn Products Limited. All rights reserved. 

Summary of Contents for Classik-K


















Reviews:

No comments

Brands by name

Popular brands

Load more brands