background image

Installation Guide Linear Motors 

 

ENG 

NTI AG / LinMot 

P10-54 / P10-54-D24/25/25S 

Page 5 / 32 

2  Safety instructions 

 

Contusions

 

Sliders contain neodynium magnets and have a strong attractive force. 
Careless handling could cause fingers or skin to become pinched between two sliders.  
This may lead to contusions, bruises, and bone fractures. 
When handling sliders, wear thick protective gloves and keep a minimum distance between 
sliders. Refer to the "Minimum distance from slider" section for minimum distance. 
 
To reduce the risk of injury, never more than one slider should be held or transported by the 
same person without packaging. 

 

 

Pacemaker / Implanted heart defibrillator 

Sliders could affect the functioning of pacemakers and implanted heart defibrillators. For the 
duration of a strong approach to a magnetic field, these devices switch into test mode and 
will not function properly. 
 

 

If you wear one of those devices keep the following minimum distances between the 
pacemaker / defibrillator and slider: 

 

Min. 250 mm (10ʺ) for slider Ø 27 mm and 28 mm (PL01-27 / 28 / PL10-28) 

 

Min. 150 mm (6ʺ) for slider Ø 19 mm and 20 mm (PL01-19 / 20) 

 

Min. 100 mm (4ʺ) for slider Ø 12 mm (PL01-12) 

 

Inform others who wear these devices to comply with these minimum distances! 

 

 

Caution - Risk of Electric Shock ! 

Before working, make sure that there are no high voltages. 

 

 

Fast-moving machine parts 

The sliders of LinMot linear motors are fast-moving machine parts. All necessary 
precautions must be taken to prevent access during operation (provide covers, guards, 
etc.). 

 

 

Automatic restart 

The motors can start automatically under certain cricumstances! 
If necessary, a corresponding warning symbol must be provided and protection against 
entering the hazardous area or a suitable safe electronic disconnection must be provided! 

 

 

Risk of injury due to a defect or fault 

For areas where a defect or fault can result in substantial property damage or even serious 
personal injury, additional external precautions must be taken or devices must be installed 
to ensure safe operation even if a defect or fault occurs (eg. suitable safe electronic 
disconnection, mechanical interlocks, barriers, etc.). 

 

 

Magnetic field 

Magnets integrated in the sliders produce a strong magnetic field. They could damage TVs, 
laptops, computer hard drives, credit and ATM cards, data storage media, mechanical 
watches, hearing aids, and speakers. 

 

Keep magnets away from devices and objects that could be damaged by strong 
magnetic fields. 

 

For the above mentioned objects, keep a minimum distance as described in the 
"Pacemaker / implanted defibrillator" section. 

 

For non-anti-magnetic watches, keep the double minimum distance. 

 

 

 

Summary of Contents for P10-54

































Reviews: