Installation Guide Linear Modules
ENG
NTI AG / LinMot
DM01-23 / 37 / 48
Page 23 / 72
7. Replace wiper (optional)
Remove the old wipers using pointed pliers and
insert the new ones manually at both ends of
the stator.
8. Insert guide shafts
The guide shafts are reinserted together with
the rear mounting plate on the side without
connector.
9. Insert the slider
The slider is inserted together with the front
mounting plate on the side of the connector.
When handling with sliders, there are
sometimes large magnetic forces of
attraction. Observe the warnings in
section 2! If necessary, cover nearby
iron constructions with non-magnetic
material (e.g. wood).
10. Observe installation position of the
mounting plates
The front mounting plate must be
positioned on the side of the connector
and the rear mounting plate on the
opposite side.
The mounting positions of the
mounting plates must not be
interchanged!
