LinMot 0150-5321, Installation Manual

Page: 34 / 36

Installation Guide Linear Modules ENG
Page 34 / 36 FM01-48 NTI AG / LinMot
12 EU Declaration of Conformity CE-Marking
NTI AG / LinMot ®
Bodenaeckerstrasse 2
8957 Spreitenbach
Switzerland
Tel.: +41 (0)56 419 91 91
Fax: +41 (0)56 419 91 92
declares under sole responsibility the compliance of the products:
•
Linear modules with carriage series CF48x150-HP-BE02-MD01-C
•
Linear modules with carriage series CF48x150-HP-BE02-MD01-C-2S
•
Linear modules with carriage series CF48x150-HP-BE02-MD02-C
•
Linear modules with carriage series CF48x150-HP-BE02-MD02-C-2S
•
Linear modules with carriage series CF48x240-HP-BE02-MD01-C
•
Linear modules with carriage series CF48x240-HP-BE02-MD01-C-2S
•
Linear modules with carriage series CF48x240-HP-BE02-MD02-C
•
Linear modules with carriage series CF48x240-HP-BE02-MD02-C-2S
•
Linear modules with carriage series CF48x360-HP-BE02-MD01-C
•
Linear modules with carriage series CF48x360-HP-BE02-MD02-C
with the EMC Directive 2014/30/EU.
Applied harmonized standards:
•
EN 61000-6-2: 2005 (Immunity for industrial environments)
•
EN 61000-6-4: 2007 (Emission for industrial environments)
According to the EMC directive, the listed devices are not independently operable products.
Compliance of the directive requires the correct installation of the product, the observance of specific
installation guides and product documentation. This was tested on specific system configurations.
The safety instructions of the manuals are to be considered.
The product must be mounted and used in strict accordance with the installation instructions contained within
the installation guide, a copy of which may be obtained from NTI AG.
Company: NTI AG
Spreitenbach, 14.06.2022
Dr.-Ing. Ronald Rohner
CEO NTI AG