56
SNTP
Time Synchronized via
DHCP
Enable time-sync through DHCP protocol
Primary Time Server
Set primary time server address
Secondary Time Server
Set secondary time server address, when primary server
is not reachable, the device will try to connect to
secondary time server to get time synchronization.
Time zone
Select the time zone
Resync Period
Time of re-synchronization with time server
Daylight Saving Time Settings
Location
Select the user's time zone specific area
DST Set Type
Select automatic DST according to the preset rules of
DST, or the manually input rules
Offset
The DST offset time
Month Start
The DST start month
Week Start
The DST start week
Weekday Start
The DST start weekday
Hour Start
The DST start hour
Month End
The DST end month
Week End
The DST end week
Weekday End
The DST end weekday
Hour End
The DST end hour
Manual Time Settings
To set the time manually, you need to disable the SNTP service first, and you need to fill
in and submit each item of year, month, day, hour and minute in the figure above to
make the manual settings successful.
System time: Display system time and its source
(SIP automatic get >SNTP automatic get >manual manual setting)
9.26
Intercom settings>>Time plan
The user can set the time point and time period for the device to perform a certain action.
