background image

FCC Statement 
Changes or modifications not expressly approved by the party responsible for compliance could 
void the user's authority to operate the equipment. 
This equipment has been tested and found to comply with the limits for a Class B digital device, 
pursuant  to  Part  15  of  the  FCC  Rules.  These  limits  are  designed  to  provide  reasonable 
protection  against  harmful  interference  in  a  residential  installation.  This  equipment  generates 
uses and can radiate radio frequency energy and, if not installed and used in accordance with 
the instructions, may cause harmful interference to radio communications. However, there is no 
guarantee  that  interference  will  not  occur  in  a  particular  installation.  If  this  equipment  does 
cause harmful interference to radio or television reception, which can be determined by turning 
the equipment off and on, the user is encouraged to try to correct the interference by one or 
more of the following measures: 
-- Reorient or relocate the receiving antenna. 
-- Increase the separation between the equipment and receiver. 
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is 
connected. 
-- Consult the dealer or an experienced radio/TV technician for help 
This  device  complies  with  part  15  of  the  FCC  rules.  Operation  is  subject  to  the  following  two 
conditions  (1)this  device  may  not  cause  harmful  interference,  and  (2)  this  device  must  accept 
any interference received, including interference that may cause undesired operation. 
This  equipment  complies  with  FCC  radiation  exposure  limits  set  forth  for  an  uncontrolled 
environment.  This  equipment  should  be  installed  and  operated  with  minimum  distance  20cm 
between the radiator & your body. 

Summary of Contents for D1












Reviews: