28
Specifications
Linksys X2000/X3000
28
X3000
Standards
WLAN: 802 .11n, 802 .11g, 802 .11b
Ethernet: 802 .3, 802 .3u, 802 .3ab
ADSL: T1 .413i2, G .992 .1 (G .DMT), G .992 .2
(G .Lite), G .992 .3 (ADSL2), G .992 .5 (ADSL2+)
for Annex A, B, M, L, U-R2 for Annex B
USB 2 .0
Ports
DSL, Cable, Gigabit (10/100/1000) Ethernet (1-4),
Power, USB
Buttons
On/Off, Reset, Wi-Fi Protected Setup™
LEDs
Power, Ethernet (1-4), Wi-Fi Protected Setup,
Wireless, Internet
Cabling Type
CAT5, RJ-11 (for Annex A), RJ-45 (for Annex B)
Antennas
2 Internal
Modulations
802 .11b: CCK/QPSK, BPSK
802 .11g: OFDM/BPSK, QPSK, 16-QAM, 64-QAM
802 .11n: OFDM/BPSK, QPSK, 16-QAM, 64-QAM
Transmit Power
802 .11b: 12,5 ± 1,5 dBm
802 .11g: 12,5 ± 1,5 dBm
802 .11n: 12,5 ± 1,5 dBm
Receive Sensitivity
802 .11b: -85 dBm (typical) @ 11 Mbps
802 .11g: -70 dBm (typical) @ 54 Mbps
802 .11n HT20: -68 dBm (typical) @ MCS15
802 .11n HT40: -65 dBm (typical) @ MCS15
Antenna gain
802 .11b/g/n: Right antenna 3,60 dBi
Left antenna 2,51 dBi
Security Features
WPA2
™
/WPA
™
Personal and Enterprise;
128, 64 bits WEP; MAC Address Filtering;
SPI Firewall
OS Requirements
Windows 7, Windows Vista, Windows Vista
(for Setup wizard)
64-bit edition, or Windows XP
Mac OS X 10 .5 or higher
USB Storage
Maximum supported capacity: 1 x 2 TB
Environmental
Dimensions
202 x 34 x 160 mm (8,0” x 1,3” x 6,3”)
Weight
335 g (11,8 oz)
Power
12VDC, 1,5A
Certification
FCC, CE, Telepermit, K .21, UL, CB,
Wi-Fi (802 .11b/g/n), WPA
™
, WPA2
™
, WMM,
Wi-Fi Protected Setup
™
Operating Temperature
0 to 40°C (32 to 104°F)
Storage Temperature
-20 to 70°C (-4 to 158°F)
Operating Humidity
10 to 85% Noncondensing
Storage Humidity
5 to 90% Noncondensing
NOTES
For regulatory, warranty, and safety information, see the CD that
came with your modem router or go to
Specifications are subject to change without notice .
Maximum performance derived from IEEE Standard 802 .11
specifications . Actual performance can vary, including lower
wireless network capacity, data throughput rate, range and
coverage . Performance depends on many factors, conditions and
variables, including distance from the access point, volume of
network traffic, building materials and construction, operating
system used, mix of wireless products used, interference and other
adverse conditions .
