Chapter 3
Configuration
6
Wireless-G USB Network Adapter
Wireless Mode
This is the mode of the wireless network
currently in use.
Channel
This is the channel to which the wireless network
devices are set.
Security
This is the status of the wireless security
feature.
MAC Address
This is the MAC address of the wireless
network’s access point.
Refresh
Click
Refresh
to perform a new search for
wireless devices.
Connect
To connect to one of the networks on the list,
select the wireless network, and click
Connect
. If the
network’s wireless security is enabled, then one of these
wireless security screens appears:
WEP
If the network has WEP encryption enabled, then you
see the
WEP Key Needed for Connection
screen. Select the
appropriate level of WEP encryption,
64-Bit
or
128-Bit
.
Then enter the network’s Passphrase or WEP Key. Click
Connect
. To cancel the connection, click
Cancel
.
WEP Security
WPA Personal
If the network has the WPA Personal security enabled, then
you see the
WPA Personal Needed for Connection
screen.
Select the appropriate encryption type,
TKIP
or
AES
. Enter
the network’s Passphrase in the
Passphrase
field. Then click
Connect
. To cancel the connection, click
Cancel
.
WPA-Personal Security
PSK2
If the network has PSK2 wireless security enabled, then you
will see the
PSK2 Needed for Connection
screen. Enter the
network’s Passphrase or pre-shared key in the
Passphrase
field. To connect to the network, click Connect. To cancel
the connection, click Cancel.
PSK2 Security
Profiles
The
Profiles
screen lets you save different configuration
profiles for different network setups. The table on the left
displays a list of available profiles with their profile names
and wireless network names.
