5
4
Chapter 4: Software Installation
and Configuration for Windows
98SE, Me, and 2000
The Wireless Wireless-B USB Network Adapter Setup Wizard will guide you
through the installation procedure for Windows 98SE, Me, and 2000. The Setup
Wizard will install the WLAN Monitor and driver, as well as configure the
Adapter.
Insert the
Setup Wizard CD-ROM
into your CD-ROM drive. The Setup
Wizard should run automatically, and the
Welcome
screen should appear. If it
does not, click the
Start
button and choose
Run
. In the field that appears, enter
D:\setup.exe
(if “D” is the letter of your CD-ROM drive).
Note for Windows 98SE, Me, and 2000 users:
You must run the
Setup Wizard to install the software before installing the hardware.
Figure 4-1
Note for Windows XP users:
Do
NOT
run the Wireless-B USB
Network Adapter Setup Wizard. Proceed directly to “Chapter 5:
Hardware Installation.”
Overview
Chapter 3: Getting to Know the
Wireless USB Network Adapter
Port
USB
The Adapter’s USB port is located on the side of the Adapter.
You will attach the included USB cable to this port. The other
end of the cable will connect to your PC’s USB port.
LED Indicators
Power
Green
. The
Power
LED lights up when the Adapter is pow-
ered on.
Link
Green
. The
Link
LED lights up when the Adapter has an
active connection.
The Wireless USB Network Adapter’s Port and LEDs
Figure 3-1
Figure 3-2
