47
Chapter 5: Configuring the Wireless-N Gigabit Gaming Router
The STATUS Tab - ROUTER
Wireless-N Gigabit Gaming Router
The STATUS Tab - ROUTER
The
ROUTER
screen displays information about the Router and its current settings. The on-screen information will
vary depending on the Internet Connection Type selected on the
SETUP
screen.
Router Status
Firmware Version
. This is the version number of the Router’s current firmware.
NAT
. This shows whether the NAT is enabled or disabled.
Current Time
. This shows the time set on the Router.
System Up Time
. This displays the amount of time the system has been operating in this session.
Internet Connections
Connection Type
. This indicates the type of Internet connection you are using.
Internet IP Address
. The Router’s Internet IP address is displayed here.
Subnet Mask
. The Router’s Subnet Mask for DHCP and static IP connections is displayed here.
Default Gateway
. The Default Gateway address is displayed here for DHCP and static IP connections.
DNSIP Address
. Shown here are the DNS (Domain Name System) IP addresses currently used by the Router.
MAC Address
. This is the Router’s MAC address, as seen by your ISP.
Click the
Renew
button to replace the current IP address—of the device connected to the Router’s Internet
port—with a new IP address. (Available for a DHCP connection).
Click the
Release
button to release the current IP address of the device connected to the Router’s Internet port.
(Available for a DHCP connection.)
Click
REFRESH
to update the on-screen information.
Figure 5-34: STATUS Tab - ROUTER
Summary of Contents for WRT330N - Wireless-N Gigabit Gaming Router Wireless
Page 1: ...Model No Gigabit Gaming Router Wireless N WRT330N User Guide WIRELESS GHz 2 4...
Page 88: ...82 Appendix I Regulatory Information Wireless N Gigabit Gaming Router...
Page 89: ...83 Appendix I Regulatory Information Wireless N Gigabit Gaming Router...
Page 90: ...84 Appendix I Regulatory Information Wireless N Gigabit Gaming Router...