background image

21

Chapter 5: Configuring the Wireless-N Gigabit Gaming Router
The SETUP Tab - MAC ADDRESS CLONE

Wireless-N Gigabit Gaming Router

The SETUP Tab - MAC ADDRESS CLONE

A MAC address is a 12-digit code assigned to a unique piece of hardware for identification, like a social security 
number. Some ISPs will require you to register a MAC address in order to access the Internet. If you do not wish 
to re-register the MAC address with your ISP, you may assign the MAC address you have currently registered with 
your ISP to the Router with the MAC Address Clone feature.

Mac Cloning

To use MAC address cloning, select 

Enable

. Otherwise, keep the default, 

Disable

.

MAC Address

. Enter the MAC Address registered with your ISP.

ClonePC’s MAC Address

. If you want to clone the MAC address of the PC you are currently using to configure the 

Router, then click this button. The Router will automatically detect your PC’s MAC address, so you do NOT have to 
call your ISP to change the registered MAC address to the Router’s MAC address. It is recommended that the PC 
registered with the ISP is used to open the 

MAC Address Clone

 screen.

When you have finished making changes to this screen, click 

SAVE SETTINGS

 to save the changes, or click 

CANCEL CHANGES

 to clear all fields and start over.

mac address

: the unique address that a 

manufacturer assigns to each networking device. 

Figure 5-9: SETUP Tab- MAC ADDRESS CLONE

Summary of Contents for WRT330N - Wireless-N Gigabit Gaming Router Wireless





























































































Reviews: