7b. On the following screen, enter your wireless network’s SSID name. The
SSID must be identical for all points in the network. To join any available
SSID, type ANY. The default setting is linksys (all lowercase). Enter this
information and click the Next button.
8. At this point, the Wizard will ask you to review your settings before start-
ing to copy files. Select Back to review or change any settings or Next if
you are satisfied with your settings.
8
6. When the following screen appears, choose either Infrastructure mode or
Ad-Hoc mode, depending on your needs. If you are unsure whether to
choose Infrastructure or Ad-Hoc, refer to the next section for more infor-
mation. Once you have made your choice, click the Next button.
7a. If you chose Infrastructure Mode, go on to Step 7b now. If you chose Ad-
Hoc Mode, choose the correct operating channel that applies to your net-
work. The channel you choose should be set as the same as the other points
in your wireless network. The default channel is set to Channel 6. Select
the appropriate channel and click the Next button.
9
Wireless Network CF Card
Instant Wireless
TM
Series
