background image

13

Chapter 5: Configuring the Wireless-G Access Point with Power Over Ethernet
The Setup Tab

Wireless-G Access Point with Power Over Ethernet

Select 

Static IP Address

 if you want to assign a static or fixed IP address to the Access Point. Then complete the 

following:

IP Address

. The IP address must be unique to your network. We suggest you use the default IP address of 

192.168.1.245

.

Subnet Mask

. The Subnet Mask must be the same as that set on your Ethernet network.

Default Gateway

. Enter the IP address of your network’s gateway. The gateway is the device that enables 

communication between your computers and the Internet. In most cases, your router acts as your gateway.

Primary and Secondary DNS

. Enter the IP address of your Domain Name System (DNS) server. This 

information should be provided by your ISP. You should enter at least one DNS address.

Change these settings as described here and click 

Save Settings 

to apply your changes, or click 

Cancel 

Changes 

to cancel your changes. Click 

Help

 for more information.

Figure 5-3: Setup - Static IP Address Screen

static ip address:

 a fixed address assigned to a computer or 

device that is connected to a network.

Summary of Contents for WAP54GP - Wireless-G Access Point




































































Reviews: