Linksys WAP300N Manual Download

Page: 4 / 44

With multiple WAP300N

operating in this mode, WAP300Ns can wirelessly connect two or more wired

networks together.

NOTE

: When this device is set to Wireless Bridge mode, it will communicate only with other WAP300N(

)

that is/are also in Wireless Bridge mode. Therefore, you will need at least two WAP300N

to make use

of this operation mode.

If you would like to use WAP300N in this mode,

Step 1:

Proceed to

Setup > Operation Mode

and follow the instructions to set the device to this mode.

Step 2:

Proceed to

Wireless > Basic Wireless Settings

and follow the instructions to configure the basic

wireless settings.

Step 3:

Proceed to

Wireless > Wireless Security

and follow the instructions to configure the wireless

security.

Step 4:

Connect WAP300N

’

s Ethernet port to one of your wired networks. Repeat

step 1

additional WAP300Ns and install one WAP300N in each wired network that needs to be wirelessly
connected together.

Summary of Contents for WAP300N













































Search results

Summary of Contents for WAP300N

Reviews:

Related manuals for WAP300N

Brands by name

Popular brands

Linksys WAP300N, Manual

Search results

Summary of Contents for WAP300N

Reviews:

Related manuals for WAP300N

Brands by name

Popular brands