background image

4

Appendix D

Warranty Information

Limited Warranty

Linksys  warrants  to  You  that,  for  a  period  of  five  years 
(the  "Warranty  Period"),  your  Linksys  Product  will  be 
substantially free of defects in materials and workmanship 
under  normal  use.  Your  exclusive  remedy  and  Linksys’ 
entire  liability  under  this  warranty  will  be  for  Linksys  at 
its option to repair or replace the Product or refund Your 
purchase  price  less  any  rebates.  This  limited  warranty 
extends only to the original purchaser. 

If  the  Product  proves  defective  during  the  Warranty 
Period  call  Linksys Technical  Support  in  order  to  obtain 
a  Return  Authorization  Number,  if  applicable.  BE  SURE 
TO  HAVE YOUR  PROOF  OF  PURCHASE  ON  HAND  WHEN 
CALLING. If You are requested to return the Product, mark 
the Return Authorization Number clearly on the outside 
of the package and include a copy of your original proof 
of purchase. RETURN REQUESTS CANNOT BE PROCESSED 
WITHOUT  PROOF  OF  PURCHASE.  You  are  responsible 
for  shipping  defective  Products  to  Linksys.  Linksys  pays 
for UPS Ground shipping from Linksys back to You only. 
Customers located outside of the United States of America 
and Canada are responsible for all shipping and handling 
charges. 

ALL  IMPLIED  WARRANTIES  AND  CONDITIONS  OF 
MERCHANTABILITY  OR  FITNESS  FOR  A  PARTICULAR 
PURPOSE  ARE  LIMITED  TO  THE  DURATION  OF 
THE  WARRANTY  PERIOD.  ALL  OTHER  EXPRESS  OR 
IMPLIED 

CONDITIONS, 

REPRESENTATIONS 

AND 

WARRANTIES,  INCLUDING  ANY  IMPLIED  WARRANTY  OF 
NON-INFRINGEMENT, ARE DISCLAIMED. Some jurisdictions 
do not allow limitations on how long an implied warranty 
lasts, so the above limitation may not apply to You. This 
warranty gives You specific legal rights, and You may also 
have other rights which vary by jurisdiction.

This warranty does not apply if the Product (a) has been 
altered,  except  by  Linksys,  (b)  has  not  been  installed, 
operated,  repaired,  or  maintained  in  accordance  with 
instructions supplied by Linksys, or (c) has been subjected 
to  abnormal  physical  or  electrical  stress,  misuse, 
negligence, or accident. In addition, due to the continual 
development of new techniques for intruding upon and 
attacking  networks,  Linksys  does  not  warrant  that  the 
Product will be free of vulnerability to intrusion or attack.

TO THE EXTENT NOT PROHIBITED BY LAW, IN NO EVENT 
WILL LINKSYS BE LIABLE FOR ANY LOST DATA, REVENUE 
OR PROFIT, OR FOR SPECIAL, INDIRECT, CONSEQUENTIAL, 
INCIDENTAL OR PUNITIVE DAMAGES, REGARDLESS OF THE 
THEORY OF LIABILITY (INCLUDING NEGLIGENCE), ARISING 
OUT  OF  OR  RELATED  TO  THE  USE  OF  OR  INABILITY  TO 
USE  THE  PRODUCT  (INCLUDING  ANY  SOFTWARE),  EVEN 
IF  LINKSYS  HAS  BEEN  ADVISED  OF  THE  POSSIBILITY  OF 
SUCH  DAMAGES.  IN  NO  EVENT  WILL  LINKSYS’  LIABILITY 
EXCEED THE  AMOUNT  PAID  BY YOU  FOR THE  PRODUCT. 
The foregoing limitations will apply even if any warranty or 
remedy provided under this Agreement fails of its essential 
purpose. Some jurisdictions do not allow the exclusion or 
limitation of incidental or consequential damages, so the 
above limitation or exclusion may not apply to You.

Please direct all inquiries to: Linksys, P.O. Box 18558, Irvine, 
CA 92623.

24-Port 10/100 + 2-Port 10/100/1000 Gigabit Advanced Smart Switch with 2 Combo SFPs

Appendix D:  
Warranty Information

Summary of Contents for SLM224G2


























































Reviews: