SFE2010/SFE2010P Administration Guide
41
System Configuration
Using the Console
TraceRoute IPv4
You can use the
TraceRoute IPv4
screen to run a trace route test for an IPv4 address
To open the screen:
1. From the
Switch Main Menu
, select
1. System Configuration
.
2. From the
System Configuration
Menu
, select
6. IP Configuration
.
3. From the
IP Configuration
menu, select
5. Network Configuration
.
4. From the
Network Configuration
menu, select
3. Trace Router IPv4
.
To change the IP address:
1. Select
Edit
, and then enter the IPv4 address.
2. Press the
Esc
key to move the cursor to the
Action
list.
To begin the trace route test:
1. Select
Execute
to begin the test.
2. After the test is complete, the results of the test appear on the screen.
3. When the
Operation complete
message appears, press the
Esc
key to move the cursor to the
Action
list.
