manualshive.com logo in svg

Linksys RV042, User Manual, Page: 44 / 103

Share
Download
Linksys RV042 User Manual Download Page 44

35

Chapter 6: Set Up and Configure the Router
System Management Tab - Firmware Upgrade

10/100 4-Port VPN Router

System Management Tab - Firmware Upgrade

Firmware Upgrade

Users can use the following function to upgrade the Router’s firmware to the newest version. If you have already 
downloaded the firmware into your computer, then click the 

Browse

 button to look for the file. Then, click the 

Firmware Upgrade Right Now

 button. See Figure 6-30.

Firmware Download

Users can click the

 Firmware Download from Linksys Web Site

 button to link to the downloads on the Support 

page of the Linksys website. Select the Router from the pull-down menu and choose the firmware from the 
options. After downloading the firmware, follow the Firmware Upgrade instructions above.

System Management Tab - Restart 

The recommended method of restarting your Router is to use this “Restart” tool. Restarting with this button will 
send out your log file before the box is reset. Click the 

Restart Router

 button to restart the Router. See Figure 

6-31. 

System Management Tab - Setting Backup 

This tab allows you to make a backup file of your Preferences file for the Router. See Figure 6-32.

Import Configuration File: 

You will need to specify where your Preferences file is located. Click the 

Browse

 button, and your browser will 

bring up a dialog that will allow you to select a file that you have previously saved using the Export button. After 
you select the file, click the

 Import

 button. This process may take up to a minute.  You will then need to restart 

your Router in order for the changes to take effect.

Figure 6-31: Restart

Figure 6-30: Firmware Upgrade

Figure 6-32: Setting Backup

Summary of Contents for RV042








































































































Reviews:

No comments