manualshive.com logo in svg

Linksys RV042, User Manual, Page: 21 / 103

Share
Download
Linksys RV042 User Manual Download Page 21

12

Chapter 4: Connecting the Router
Connection Instructions

10/100 4-Port VPN Router

Connection Instructions

1. Before you begin, make sure that all of your hardware is powered off, including the Router, PCs, hubs, 

switches, and cable or DSL modem.

2. Connect one end of an Ethernet network cable to one of the numbered ports on the back of the Router (see 

Figure 4-2). Connect the other end to an Ethernet port on a network device, e.g., a PC, print server, hub, or 
switch.

Repeat this step to connect more PCs or other network devices to the Router.

3. Connect your cable or DSL modem’s Ethernet cable to the Router’s Internet port. If using the DMZ/Internet 

port, connect a second cable to it, and the other end to the network device, e.g., modem or public server.

4. Power on the cable or DSL modem and the other network device if using one.

Figure 4-2: Connect a PC

Figure 4-3: Connect the Internet

Figure 4-4: Connect the DMZ/Internet

Summary of Contents for RV042








































































































Reviews:

No comments