Linksys RT41P2-AT - Broadband Router With 2 Phone Ports At&t Service Req User Manual Download | Manualshive

Page: 7 / 71

background image

1

Chapter 1: Introduction
Welcome

Broadband Router with 2 Phone Ports

Chapter 1: Introduction

Welcome

Thank you for choosing the Broadband Router with 2 Phone Ports. This Router will allow your computers to share
a high-speed Internet connection as well as resources, including files and printers. And after you have set up
your Internet phone service, you will be able to make phone or fax calls using your Internet connection.

How does the Router do all of this? By connecting your computers and peripherals, including phones or fax
machines, to the Router and connecting the Router to your cable or DSL modem, then the Router can direct and
control communications for your network.

But what does all of this mean?

Networks are useful tools for sharing Internet access and computer resources. Multiple computers can share
Internet access, so you don’t need more than one high-speed Internet connection. With Internet phone service,
your Internet access can now be shared by your phones or fax machines as well. You will be able to make phone
calls using the account you set up with AT&T, even while you’re surfing the Internet. Plus, you can access one
printer from different computers and access data located on another computer’s hard drive. Networks are even
used for playing multiplayer video games. So, networks not only are useful in homes and offices, but also can be
fun.

PCs on a wired network create a LAN, or Local Area Network. They are connected with Ethernet cables, which is
why the network is called “wired”.

To create your network, install and set up the Router. To guide you through the process, Linksys strongly
recommends that you run the Setup Wizard on the Setup CD-ROM. If you prefer to manually set up the Router, use
the instructions in the Quick Installation or this User Guide to help you. These instructions should be all you need
to get the most out of the Router.

ethernet:

an IEEE standard network protocol

that specifies how data is placed on and
retrieved from a common transmission
medium.

lan

(local area network): the computers and

networking products that make up the network
in your home or office.

NOTE:

If you want to sign up for Internet phone service or activate your account, visit

http://www.att.com/linksys

after you have installed and configured the Router. Refer to

“Chapter 6: Signing up for AT&T CallVantage

sm

Service” for more information.

«
...
5
6
7
8
9
...
»

Summary of Contents for RT41P2-AT - Broadband Router With 2 Phone Ports At&t Service Req








































































Reviews:

No comments

Related manuals for RT41P2-AT - Broadband Router With 2 Phone Ports At&t Service Req

Brand: D-Link Pages: 166

Brand: H3C Pages: 37

Brand: H3C Pages: 41

Brand: Far Tools Pages: 24

Brand: SAGEMCOM Pages: 2

Brand: FUNAI Pages: 7

Brand: Belkin Pages: 40

Brand: VKOM Pages: 20

Brand: Netis Pages: 16

Brand: MOBIDATA Pages: 30

Brand: Ebyte Pages: 21

Brand: Airlinkplus Pages: 4

Brand: Airlink101 Pages: 44

Brand: Airlink101 Pages: 48

Brand: Airlink101 Pages: 66

Brand: HPE Pages: 4

AirGuard 3e-525C-2

Brand: 3e Technologies International Pages: 80

Brand: 3e Technologies International Pages: 104

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands