Chapter 3
Advanced Configuration
16
RangePlus Wireless Router
Click
Save Settings
to apply your changes, or click
Cancel
Changes
to cancel your changes.
Wireless > Wireless MAC Filter
Wireless access can be filtered by using the MAC addresses of
the wireless devices transmitting within your network’s radius.
Wireless > Wireless MAC Filter
Wireless MAC Filter
Enabled/Disabled
To filter wireless users by MAC Address,
either permitting or blocking access, select
Enabled
. If you
do not wish to filter users by MAC Address, keep the default
setting,
Disabled
.
Access Restriction
Prevent
Select this
to block wireless access by MAC
Address. This button is selected by default.
Permit
Select this to allow wireless access by MAC
Address. This button is not selected by default.
MAC Address Filter List
Wireless Client List
Click this to open the
Wireless Client
List
screen.
Wireless Client List
Wireless Client List
This screen shows computers and other devices on
the wireless network. The list can be sorted by Client
Name, Interface, IP Address, MAC Address, and Status.
Select
Save to MAC Address Filter List
for any device
you want to add to the MAC Address Filter List. Then
click
Add
.
To retrieve the most up-to-date information, click
Refresh
. To exit this screen and return to the
Wireless
MAC Filter
screen, click
Close
.
MAC 1-50
Enter the MAC addresses of the devices whose
wireless access you want to block or allow.
Click
Save Settings
to apply your changes, or click
Cancel
Changes
to cancel your changes.
Wireless > Advanced Wireless Settings
This
Advanced Wireless Settings
screen is used to set up
the Router’s advanced wireless functions. These settings
should only be adjusted by an expert administrator as
incorrect settings can reduce wireless performance.
Wireless > Advanced Wireless Settings
