EtherFast
®
10/100 LAN Cards
4. Select "Search for the best driver for your device (Recommended)” and click
the Next button.
5. Select “Specify a location” and type “A:\WIN98” in the drop-down box.
Then, click the Next button.
18
Linksys Instant EtherFast
®
Series
17
Windows 98 Installation and Setup
Overview
After physically installing the EtherFast
®
10/100 LAN Card in your computer,
follow these instructions to install the network device driver. The installation
procedure for the network driver will vary depending on which version of
Windows 98 you are using, and on your current system configuration. If at any
time during the installation you encounter problems, consult the
Troubleshooting
section.
1. Start up your PC in Windows 98.
2. Windows 98 will automatically detect the presence of the EtherFast
®
Card in
your PC.
3. Slide the “Linksys LNE100TX (v5) Fast Ethernet Adapter Drivers” diskette
into your floppy drive while the Add New Hardware Wizard window is visi-
ble. Click the Next button.
Installing the Network Card’s Driver
