EtherFast
®
Layer 3 Management 4-Port Gigabit Ethernet Switch
User Configuration
The User Configuration screen, shown in Figure 6-14, can be used to restrict
management access based on specified user names and passwords. There are
two user types, Administrator and Guest. Only the Administrator has write
access for parameters governing the SNMP agent.
• User Name - Specifies user authorized management access to the
Switch via the console, telnet, or the Web.
• Access Right - ADMIN: Read/Write for all screens.
GUEST: Read Only for all screens.
• Console - Enables and Disables management via the console.
• Telnet - Enables and Disables management via a telnet connection.
• HTTP - Enables and Disables management via HTTP, e.g., a Web brows-
er.
Select Add to add a user. Select OK to return to the previous panel.
24
Instant EtherFast
®
Series
23
IP Trap Manager
The IP Trap Manager screen, shown in Figure 6-13, specifies management
stations that will receive authentication failure messages or other trap mes-
sages from the Switch. Up to five trap managers may be entered.
• IP Address - IP address of the trap manager.
• Community Name - A community specified for trap management
access.
• Status - When Enabled, trap messages will be sent to the specified IP
Address.
Select Apply to make changes. Select OK to return to the previous panel.
Select Cancel to cancel any changes.
Figure 6-13
Figure 6-14