35
Advanced Wireless-N Router
Linksys E2000
Chapter 3: Advanced Configuration
•
<Type> Log
The Incoming Log displays a temporary
log of the source IP addresses and destination
port numbers for the incoming Internet traffic . The
Outgoing Log displays a temporary log of the local IP
addresses, destination URLs/IP addresses, and service/
port numbers for the outgoing Internet traffic . The
Security log displays the login information for the
browser-based utility . The DHCP Client Log displays
the LAN DHCP server status information .
Click
Save the Log
to save this information to a file on
your computer’s hard drive . Click
Refresh
to update
the log . Click
Clear
to clear all the information that is
displayed .
Click
Save Settings
to apply your changes, or click
Cancel
Changes
to clear your changes .
Administration > Diagnostics
The diagnostic tests (Ping and Traceroute) allow you to
check the connections of your network devices, including
connection to the Internet . This screen also allows you to
reset the Router .
Administration > Diagnostics
Reboot
Reboot
Click
Reboot
to reset the Router .
Diagnostics
Ping Test
Ping checks the status of a connection .
IP or URL Address
Enter the address of the computer,
device, or website whose connection you wish to test .
Packet Size
Enter the packet size you want to use . The
default is
32
bytes .
Times to Ping
Enter the number of times you wish to test
the connection . The default is
5
.
Start to Ping
To run the test, click this option . The
Ping
Test
screen shows if the test is successful . Click
Close
to
return to the
Diagnostics
screen . Click
Stop
to stop the
test .
Diagnostics > Ping
Traceroute Test
Traceroute checks the performance of a connection .
IP or URL Address
Enter the address of the computer,
device, or website whose connection you wish to test .
Start to Traceroute
To run the test, click this option .
The
Traceroute
screen shows if the test is successful . Click
Close
to return to the
Diagnostics
screen . Click
Stop
to
stop the test .
Diagnostics > Traceroute