25
Advanced Wireless-N Router
Linksys E2000
Chapter 3: Advanced Configuration
Wireless Security > WEP
Encryption
Select a level of WEP encryption,
40/64 bits
(10 hex digits)
or
104/128 bits (26 hex digits)
. The
default is
40/64 bits (10 hex digits)
.
Passphrase
Enter a Passphrase to automatically generate
WEP keys . Then click
Generate
.
Key 1
If you did not enter a Passphrase, enter the WEP
key manually .
RADIUS
This option features WEP used in coordination with a
RADIUS server . (This should only be used when a RADIUS
server is connected to the Router .)
NOTE:
If you are using WEP encryption, each
device in your wireless network MUST use the
same WEP encryption method and encryption
key, or else your wireless network will not
function properly .
Wireless Security > RADIUS
RADIUS Server
Enter the IP address of the RADIUS server .
RADIUS Port
Enter the port number of the RADIUS
server . The default value is
1812
.
Shared Secret
Enter the key shared between the Router
and the server .
Encryption
Select a level of WEP encryption,
40/64 bits
(10 hex digits)
or
104/128 bits (26 hex digits)
. The
default is
40/64 bits (10 hex digits)
.
Passphrase
Enter a Passphrase to automatically generate
WEP keys . Then click
Generate
.
Key 1
If you did not enter a Passphrase, enter the WEP
key manually .
Click
Save Settings
to apply your changes, or click
Cancel
Changes
to clear your changes .
Wireless > Wireless MAC Filter
Wireless access can be filtered (restricted) by specifying the
MAC addresses of the devices in your wireless network .
Wireless > Wireless MAC Filter
Wireless MAC Filter
Enabled/Disabled
To filter wireless users by the MAC
addresses of their computers or devices, select
Enabled
.
Otherwise, keep the default,
Disabled
.
Access Restriction
Prevent PCs listed below from accessing the wireless
network
Select this option to block wireless access by
MAC address . This option is selected by default .
Permit PCs listed below to access the wireless
network
Select this to option allow wireless access by
MAC address . This option is disabled by default .