Linksys CIT300 Page 25 User Manual Download

Page: 25 / 113

Dual-Mode Internet Telephony Kit

Chapter 3: Getting Started
Getting Started with the USB Base Station

Getting Started with the USB Base Station

To connect the USB base station, follow these instructions:

1. If you have a landline, connect a RJ-11 telephone cable (included) to the LINE port of the USB base station.

Then connect the other end to your telephone wall jack.

2. Connect the USB cable of the USB base station to a USB port on your Skype-enabled PC.

3. Connect the included power adapter to the power port of the USB base station. Then plug the power adapter

into an electrical outlet.

Proceed to the next section, “Powering On the Handset.”

Powering On the Handset

When the handset is fully charged, press and hold down the

Power or End Call

key for two seconds; this will

power on the handset. To power off the handset, press and hold down the

Power or End Call

key for

two seconds.

Proceed to the next section, “Setting Up Your PC.”

Figure 3-3: Connect to the

LINE Port

Summary of Contents for CIT300


















































































































Search results

Summary of Contents for CIT300

Reviews:

Related manuals for CIT300

Brands by name

Popular brands

Linksys CIT300, User Manual

Search results

Summary of Contents for CIT300

Reviews:

Related manuals for CIT300

Brands by name

Popular brands