![background image](http://html1.mh-extra.com/html/linksys/487023u/487023u_user-manual_1923792013.webp)
7
Chapter 4: Software Installation and Configuration
Wireless-G Notebook Adapter
Chapter 4: Software Installation and Configuration
The Wireless-G Notebook Adapter Setup Wizard will guide you through the installation procedure. The Setup
Wizard will install the Wireless Network Monitor and driver, as well as configure the Adapter.
Insert the
Setup Wizard CD-ROM
into your CD-ROM drive. The Setup Wizard should run automatically, and the
Welcome
screen should appear. If it does not, click the
Start
button and choose
Run
. In the field that appears,
enter
D:\setup.exe
(if “D” is the letter of your CD-ROM drive).
On the Welcome screen, you have the following choices:
Install
- Click the
Install
button to begin the software installation process.
User Guide
- Click the
User Guide
button to open the PDF file of this User Guide.
Exit
- Click the
Exit
button to exit the Setup Wizard.
NOTE:
You must run the Setup Wizard to install the software
before installing the hardware.
Figure 4-1: The Setup Wizard’s Welcome Screen
hardware
: the physical aspect of computers,
telecommunications, and other information technology devices
software
: instructions for the computer