3.6.2.2. System Log
Fig. 62. System log settings.
System events can be logged to the on-board RAM of the DRBAP (
Local log
) or sent to a remote
computer on which an SNMP trap monitor program runs (
Remote log by SNMP trap
). See the next
subsection for more information about SNMP trap settings.
The system events are divided into the following categories:
General
: system and network connectivity status changes.
Built-in AP
: wireless client association and WEP authentication status changes.
MIB II traps
:
Cold Start
,
Warm Start
,
Link Up
,
Link Down
and
SNMP Authentication
Failure
.
RADIUS user authentication
: RADIUS user authentication status changes.
NOTE:
The
SNMP Authentication Failure
trap is issued when using an incorrect community string to
manage the DRBAP via SNMP and the SNMP MIB II OID,
snmpEnableAuthenTraps
, is enabled
(
disabled
by default).
3.6.2.3. SNMP
Fig. 63. SNMP settings.
The SNMP (Simple Network Management Protocol) functionality can be disabled, and you can spec-
ify the name (used as a
password
) of the read-only and read-write community. In addition, up to 5
SNMP trap targets can be set in the
SNMP Trap
Table
.
To specify a trap target:
39