manualshive.com logo in svg

linkPro WLB-230BXLE, User Manual, Page: 27 / 49

Share
Download
linkPro WLB-230BXLE User Manual Download Page 27

 

On this page, you could change the password for the right to modify the configuration of the DRBAP. 
The new password must be typed twice for confirmation. 

3.3.3. Managing Firmware 

 

Fig. 30. Firmware management protocol setting. 

Firmware management operations for the DRBAP include 

firmware upgrade

, 

configuration backup

, 

configuration restore

, and 

configuration reset

. Firmware upgrade, configuration backup, and con-

figuration restore can be achieved via HTTP or TFTP. The HTTP-based way is suggested because it’s 
more user friendly. However, due to different behavior of different Web browser types and versions, 
HTTP-based firmware management operations may not work properly with some Web browsers. If 
you cannot successfully perform HTTP-based firmware management operations with your Web 
browser, try the TFTP-based way. 

TIP: 

You can use Upgrade Wizard of Wireless Network Manager to upgrade firmware. See the 

on-line help of Wireless Network Manager for more information. 

3.3.3.1. Upgrading Firmware by HTTP 

 

Fig. 31. Firmware upgrade by HTTP. 

To upgrade firmware of the DRBAP by HTTP: 

1. Click 

Browse

 and then select a correct firmware 

.bin

 file. The firmware file path will be shown 

in the 

Firmware file name 

text box. 

2. Click 

Upgrade

 to begin the upgrade process. 

3.3.3.2. Backing up and Restoring Configuration Settings by HTTP 

 

Fig. 32. Firmware backup by HTTP. 

To back up configuration of the DRBAP by HTTP: 

1. Click 

Back Up

. 

2. 

You’ll be prompted to open or save the configuration file. Click 

Save

. 

3. 

The configuration file is named by the DRBAP’s MAC address. For example, if the DRBAP’s 
MAC address is 00-01-02-33-44-55, the configuration backup file should be 

 

22

Summary of Contents for WLB-230BXLE


















































Reviews:

No comments