Linkcom Link View CDPTZIN1.3MP Page 40 User Manual Download

Page: 40 / 73

• Cold Start: The camera starts up or reboots.

• Setting changed: The SNMP setting is changed.

• Network Disconnected: The network connection was broken down.

(The camera will send trap messages after the network being

connected again)

• V3 Authentication Failed: A SNMPv3 user account tries to get

authentication but failed. (Due to incorrect password or community)

• SD Insert / Remove: A Micro SD card is inserted or removed.

• Example:

Open the MIB Browser. Use SNMPv1 or SNMPv2 to access

the camera. When the SNMP setting is edited, Manager ’s MIB

Browser(192.168.40.159) will receive the trap message of “setting

change“ from IP Camera (192.168.40.21).

• Cold Start: The camera starts up or reboots.

• Setting changed: The SNMP setting is changed.

• Network Disconnected: The network connection was broken down.

(The camera will send trap messages after the network being

connected again)

• V3 Authentication Failed: A SNMPv3 user account tries to get

authentication but failed. (Due to incorrect password or community)

• SD Insert / Remove: A Micro SD card is inserted or removed.

• Example:

Open the MIB Browser. Use SNMPv1 or SNMPv2 to access

the camera. When the SNMP setting is edited, Manager ’s MIB

Browser(192.168.40.159) will receive the trap message of “setting

change“ from IP Camera (192.168.40.21).

• Cold Start: The camera starts up or reboots.

• Setting changed: The SNMP setting is changed.

• Network Disconnected: The network connection was broken down.

(The camera will send trap messages after the network being

connected again)

• V3 Authentication Failed: A SNMPv3 user account tries to get

authentication but failed. (Due to incorrect password or community)

• SD Insert / Remove: A Micro SD card is inserted or removed.

• Example:

Open the MIB Browser. Use SNMPv1 or SNMPv2 to access

the camera. When the SNMP setting is edited, Manager ’s MIB

Browser(192.168.40.159) will receive the trap message of “setting

change“ from IP Camera (192.168.40.21).

Summary of Contents for Link View CDPTZIN1.3MP










































































Search results

Summary of Contents for Link View CDPTZIN1.3MP

Reviews:

Related manuals for Link View CDPTZIN1.3MP

Brands by name

Popular brands

Linkcom Link View CDPTZIN1.3MP, User Manual

Search results

Summary of Contents for Link View CDPTZIN1.3MP

Reviews:

Related manuals for Link View CDPTZIN1.3MP

Brands by name

Popular brands