13
3
Programming mode
Oper
ating Instructions
If you forget the PIN, the LINK 2800 DECT/GAP can only be reset by the
Customer Service department.
Factory setting: 0 0 0 0
3.2.12 Music on hold
Function Parameter
Inputs
code
MOH
27
0 #
An external caller on hold hears no music on hold.
MOH
27
1 #
An external caller on hold hears music on hold.
Factory setting: 1
3.2.13 Blacklist
Function Parameter
Mob.
no. Inputs
code
Blacklist
40
1…8
0 #
The subscriber is not monitored by the blacklist.
Blacklist
40
1…8
1 #
The subscriber is monitored by the blacklist.
Factory setting: 0
Function Parameter
Entry
Inputs
code no.
Exclusion area
41
1…5
No.
max. 6
figures #
Entry is stored.
12
3
Programming mode
3.2.9 Flash time
Function Parameter
Inputs
code
Flash time
23
0…255 #
The flash time can be changed according to line requirements, in
increments of 10 ms.
Factory setting: 27, which is equal to 270 ms
3.2.10 CLIP
Function Parameter
Inputs
code
CLIP
24
0 #
Evaluation of number presentation (CLIP) is deactivated.
CLIP
24
1 #
Evaluation of number presentation (CLIP) is activated. The number
transferred is sent to the called handset.
Factory setting: 1
3.2.11 Changing the PIN
Function Parameter
Inputs
code
PIN change
26
new PIN new PIN #
Access to programming mode can be protected using the four-digit PIN.
The PIN only needs to be entered if a new PIN has been set beforehand
in programming mode. To change the PIN, activate programming mode,
enter the new PIN twice and confirm this by pressing
#
. The change is
confirmed by the positive acknowledgement tone. Programming mode
can then only be accessed again by entering the new PIN once more. To
restore the factory setting, change the PIN to 0000.
