25
3. Max: in this mode the motorised valve will
close fully to get the maximum vacuum from
the vacuum pump.
Touch the
Max
button (1) and make sure the word
‘max’ (2) is displayed under the word ‘Vac’ to set
the Ramp to
Max
mode. Touch
Enter
button (3)
to go back to the main screen.
Running a Profile with Vacuum
When a Profile is running the following display in
the main screen will help you to visualise the
programmed vacuum setting in the
Ramp
.
1.
The programmed vacuum value will be shown
(4) if the Vaccum is set to
Auto
.
2. The word ‘Atmos’ (5) will be shown if the
Vauum
is set to
Atmos
mode.
3. The word ‘Max’ (6) will be shown if the Vacu-
um is set to
Max
mode.
Note: when a Profile is running and there is no
Vacuum setting in the Ramp, the current Ramp
will use the vacuum setting of the previous Ramp.
1
2
3
4
5
6
