Front Configuration:
PJ7:
When using the PJ7 you need to use a 6-wire headset that supports PTT on the wiring harness. If
you prefer to use a foot pedal the connections are located on the back. Plugging in the headset
causes a keyboard event as well as unplugging it causes a different event. Se Event
Configuration for more specifics.
PJ7 PTT has a keyboard event associated with it as well as unkeying the PTT
Headset Volume:
The headset volume only controls the volume in the headset. The external speaker volume is
pre-volume level (fixed)
UNLESS
you configure it differently. If configured as post volume,
then front panel volume affects the external volume.
The computer volume will affect the volume of the PJ7. If reconfigured, the volume level will
control the computers volume up/down (the same as the keyboard does). As default, the volume
control is internal to the PJ7 and will not control the computers volume.
It is recommended that you adjust the computers volume level to the loudest you will ever want
the volume in the headset, then do your adjusting from the PJ7's volume level.
Summary of Contents for PJ7rmn5068a
Page 12: ...Appendix Schematic Diagrams...
