Settings:
Mode: Hardware Resident Mode
Steps:
1) File, Read Device: This reads
the setting already programmed
into the module
2) Cycle the input you need to
assign, for example turn the
volume pot one click and the
software will provide you an
assignment screen
3) Assign Keystrokes by typing
on the keyboard (you will see the
keystrokes) or click function to
access non-keyboard functions
from Mice and Joystick devices.
When completed Click Save,
4) Once completed assigning all your keystrokes, click on File, Write to Device.
5) You can now disconnect and use the device, it is programmed and ready.
Summary of Contents for PJ7rmn5068a
Page 12: ...Appendix Schematic Diagrams...
