Link EXT70-4KUHDE, User Manual

Page: 16 / 28

12
Connections and Installations
1.
Using quality HDMI cables, connect an HDMI source (such as Blu-ray,
games console, satellite/cable TV, media server etc.) to HDMI IN port of
Transmitter
.
2.
Connect the audio system in the figure to the AUDIO OUT port of the
Transmitter
.
3.
Connect a good quality,
terminated
Cat X cable between the HDBT
OUT of the
Transmitter
to the HDBT IN of the
Receiver
.
4.
Connect the HDMI display device such as TV in the figure to the HDMI
OUT of the
Receiver
.
5.
For two-way IR control of connected sources and displays from either
location, first, connect IR Emitters to the IR OUT ports of the
Transmitter
and
Receiver
, and then insert IR Receivers into the IR IN
ports of the
Transmitter
and
Receiver
.
6.
For the
audio
DIP switch output on the receiver, please refer to the
Audio DIP Switch Control Section.
7.
Connect the included 12V power supply to the transmitter or receiver.
The PoE function carries power along the length of the cable to power
the other one.
Check Power, Status, and HDCP & Link lights are illuminated on both units to
indicate successful connection, with a lit HDCP light illustrating the presence
of encryption within the signal. Power and Link are static lights. Status should
be blinking.