Link 7224E000 Operation & Maintenance Manual Download Page 2

 

 
 
 

 

1.  INTRODUCTION 

 

 

Thank you for choosing a Link Cargo Management 
Products (CMP) DD2000 Double Deck system. We 
want  to  help  you  to  get  the  best  results  from  the 
deck and to operate it safely. This manual contains 
information  to  introduce  you  to  the  Link  CMP 
DD2000  and  to  assist  you  with  its  operation.  The 
manual is intended solely for use with this product. 
 
All information in this manual is based on the latest 
information  available  at  the  time  of  printing.  Link 
Manufacturing  reserves  the  right  to  change  its 
products  or  manuals  at  any  time  without  notice. 
Contact  Link  CMP  at  (800)  248-3057  for 
information on recent changes to products. 
 
Damaged  components  should  be  returned  to  Link 
with a pre-arranged Returned Goods Authorization 
(RGA)  number  through  the  Customer  Service 
Department.  The  damaged  component  may  then 
be  replaced  if  in  compliance  with  warranty 
conditions. 
 

2.  SAFETY SYMBOLS, TORQUE SYMBOL, and 

NOTES 

 

This is the safety alert 
symbol.  It is used to alert 
you to potential personal 
injury hazards.  Obey all 
safety messages that follow 
this symbol to avoid possible 
injury or death. 

 
 
          

WARNING

 

WARNING indicates a 
potentially hazardous 
situation which, if not 
avoided, could result in death 
or serious injury. 

 
 
          

CAUTION

 

CAUTION indicates a 
potentially hazardous 
situation which, if not 
avoided, could result in 
minor or moderate injury. 

 

The torque symbol alerts you 
to tighten fasteners to a 
specified torque value. 

3.  SAFE WORKING PRACTICES: 

 

 

3.1         

 
 

3.2 

  

4.  OPERATION GUIDELINES 

4.1  In order for this deck to operate properly, it must 

operate in the parameters specified by Link. 

4.2  No  alterations  of  any  Link  deck  component  is 

permitted  without  proper  authorization  from 
qualified Link personnel. 

 

IMPORTANT: 

IT IS IMPORTANT THAT THE EN-

TIRE OPERATION INSTRUCTIONS BE READ 
THOROUGHLY BEFORE USING THIS SYSTEM. 

 

The operation of the DD2000 Double Deck 
transport system involves moving parts.  

 

During the course of travel pinch points may exist 
between components.  

 

Keep hands and fingers clear of moving compo-
nents during operation. 

 

CAUTION 

 

Practice safe lifting procedures.   

 

The deck weldments are heavy, and can cause 
injury if lifted improperly or dropped.  Consider 
size, shape, and weight of objects being moved.  

 

Obtain help or the assistance of a crane when 

 

CAUTION 

Summary of Contents for 7224E000












Reviews: